Skip to main content

Custom-fit raised floors designed to meet individual requirements

We supply and install false floors for the easy installation of cables in transformer stations and mechanical rooms - as part of a project or as individual components.

False floors for transformer stations and other mechanical rooms according to the system

After we have measured your technical room, we take over the custom-fit production and assembly on-site.

False floor systems for all applications
Our modular false floor systems are ideally suited to transformer stations and the mechanical rooms of public, industrial buildings, or facilities.

The floors are dimensioned by us according to the intended use and requirements and are mounted pressure-resistant up to 200 mbar.

The CPS S24 system is made of 24 mm thick pressure-proof, phenolic resin-coated plywood panels and durable aluminium profiles. The system is suitable for smaller floor areas and is designed for a basic load of 1 t / m2. The construction can be partially reinforced for loads up to 3 t/m2.

 

Technical data on the CPS S24

Base platePressure-proof, phenolic resin-coated plywood panels 24 mm thick
Plate dimensionsdepending on cut
Plate thickness24 mm
Surface load1000 kg/m2, locally reinforced to withstand 3000 kg/m2 and more
Upper surfaceSlip-resistant phenolic resin film
Lower surfaceSmooth phenolic resin film
Edge protectionAcrylic dispersion paint
Ignitability
Flame resistant compliant with SFS 4190,
RE 30 compliant with SN EN 13501-2, fire-retardant
Leakage resistor
≤ 109 Ω, conforms to electrostatic dissipative coating, optional
compliant with SN EN 14041

The CPS L40 system is made of 40 mm thick pressure-proof, phenolic resin-coated plywood panels and durable aluminium profiles. The system is suitable for smaller floor areas and is designed for a basic load of 1.5 t/m2. The construction can be partially reinforced for loads up to 3 t/m2.

 

Technical data on the CPS L40

Base plateParticle board with hard linoleum flooring
Plate dimensions600 x 600 mm or 800 x 600 mm
Plate thickness40 mm
Plate weight 12,5 kg or 16,5 kg
Surface load1500 kg/m2, locally reinforced to withstand 3000 kg/m2 and more
Upper surfaceHard linoleum flooring
Lower surfaceAluminium foil as moisture protection
Edge protectionPlastic coating
Fire resistance classEI 30 compliant with SN EN 13501-2, fire-retardant
Leakage resistor
≤ 109 Ω, conforms to electrostatic dissipative coating
compliant with SN EN 14041
≤ 108 Ω compliant with SN 429001, optional

 

False floor accessories
• Lifting device with suction, incl. wall bracket for lifting the detached base plates
• Rubber insulating pad, 25 kV or 50 kV grey, 1,200 mm wide

Any questions?

Sales
Technical Support


Downloads

Blindbodensysteme


Other products