Skip to main content

Transformer sumps for liquid-filled distribution transformers

Sumps made of stainless steel or plastic according to VSE guidelines in all standard sizes and available from stock.

Oil collecting sumps for transformers in various designs

For the sake of the environment: our wide range of oil collecting sumps ensures that leaking transformers do not release oil into the environment in the event of an accident.

Range of oil collecting sumps from BBC Cellpack Power Systems

Naturally aspirated or hermetically sealed distribution transformers are filled with liquid. Depending on the transformer capacity, the content can exceed 1000 litres.

Contact of the transformer oil with the environment represents an inadmissible damage. In case of a transformer defect, prevention is mandatory.

The entire range of collecting troughs from Cellpack is therefore leak-tested and can also be used in areas with increased water protection requirements.

Transformer oil trays made of stainless steel or fibre-reinforced plastic (GFRP) are suitable for floor installation underneath the structural support profiles of the transformer.

The sizes of the polyester troughs cover the common transformer sizes up to 1200 kVA.

The steel designs are also available made-to-measure and can include a removable side panel, which makes it easier to insert the transformer into the trough.

Specially designed steel troughs can also be suspended from the transformer’s structural support profiles, leaving space underneath for cable routing.